Trenchless sewer repair has made life much easier for homeowners with mature trees, driveways and gardens over their sewer line. The two main methods are pipe bursting and pipe lining. Both avoid a long trench, but they work very differently and suit different pipes.
The quick answer
Pipe bursting replaces your old pipe with a brand-new one, and works even when the old pipe is badly cracked. Pipe lining builds a new pipe inside the old one, and works best when the old pipe is cracked but still holds its shape. A camera inspection tells you which fits your line.
How pipe bursting works
Crews dig a small pit at each end of the line. A cone-shaped bursting head is pulled through the old pipe, breaking it apart and pushing the pieces into the surrounding soil. New seamless HDPE pipe follows right behind it. The result is a completely new sewer line in the same path, usually the same size or larger.
How pipe lining works
The line is cleaned first, usually with hydro jetting. A felt liner soaked in resin is inserted, often through a cleanout, then inflated against the pipe walls and cured until it hardens. This cured-in-place pipe (CIPP) creates a smooth, jointless pipe inside the old one, sealing cracks and the joints where roots get in.
Not sure which method fits your line? Call to book a camera inspection.
Call (805) 902-1160Pipe bursting vs. pipe lining at a glance
| Pipe bursting | Pipe lining (CIPP) | |
|---|---|---|
| Result | Brand-new pipe | New pipe inside the old one |
| Access needed | A pit at each end | Often just a cleanout |
| Pipe size afterward | Same or larger | Slightly smaller |
| Badly broken pipe | Often works | Not suitable |
| Root-damaged joints | Removes them completely | Seals them inside |
| Fixes sags (bellies) | Usually not | No |
When pipe bursting is the better choice
- The old pipe is badly cracked, broken or heavily root-damaged.
- You want a completely new pipe, for example after a failed lateral inspection.
- You want to keep or increase the pipe size.
- The line is old clay or cast iron that is near the end of its life.
When pipe lining is the better choice
- The pipe has cracks or root entry points but still holds its round shape.
- Access is limited and digging even small pits would be difficult.
- The line runs under a building, slab or other spot that is hard to reach.
- You want to seal joints against roots without replacing the whole line.
When neither method works
Some lines need a traditional dig, at least for part of the job:
- Collapsed sections block both the liner and, sometimes, the bursting head.
- Bellies need the slope corrected, and both methods follow the existing path. See our guide to sewer line bellies.
- Sharp bends and very shallow lines can rule out bursting.
Which works for SLO lateral replacement?
Pipe bursting is widely used in San Luis Obispo to replace old laterals, including after a failed point-of-sale inspection, because it installs a completely new pipe. Either way, the work needs a City of San Luis Obispo permit and inspection. If you plan to apply for the city's lateral replacement rebate, confirm with the city or your contractor that your chosen method qualifies before work begins. Our lateral replacement guide covers costs, permits and the 180-day rule.
Questions to ask your contractor
- Can I see the camera footage your recommendation is based on?
- Why is bursting or lining the better fit for my line?
- Will any section need to be dug up, such as a collapse or belly?
- What pipe or liner product do you use, and what warranty comes with it?
- Do you handle the permit, city inspection and restoration?
- Will you do a final camera inspection when the job is done?
Want a trenchless quote for your San Luis Obispo home? Call now.
Call (805) 902-1160